Сензори за ниво
Level Sensors
1206 продукта · стр. 48/51
MOLOSroto DF22
MOLOSroto DF22 is the ideal choice for full, empty or demand detection in silos and containers with thin deposits on the container wall. Regardless of the type of bulk solids, its short protection tube is particularly impressive in these applications. A wide range of options and accessories enables a customized solution for your specific needs.
MOLOSroto DF23
especially for heavy bulk solids
MOLOSroto DF24
The MOLOSroto DF24 is the perfect choice for applications that require a very robust and reliable empty or demand indicator. It can be individually configured and equipped with a wide range of accessories to precisely match the specific conditions of your bulk solids and applications.
MOLOSroto DF245
The MOLOSroto DF245 with reinforced paddle shaft is used in particular for very heavy loads on the empty or demand indicator in silos and containers. The individual device configuration with numerous options and the extensive range of accessories enable precise adaptation to the specific application.
MOLOSroto DF25
With the MOLOSroto DF25, you will find a highly resilient and reliable partner for empty and demand detection in silos and containers. The customizable device configuration and the extensive range of accessories make it possible to adapt the DF25 optimally to application-specific requirements and thus meet even the highest demands.
MOLOSroto DF257
The MOLOSroto DF257 can be used in almost all bulk solids for empty or demand signaling in silos and containers. The individual device configuration with numerous options and the extensive range of accessories allow the rotary paddle switch to be precisely adapted to the specific application. The angled design with cable extension enables level measurement even at measuring points that are difficult to access.
MOLOSroto DF26
With its pendulum shaft, the MOLOSroto DF26 is installed as a reliable full indicator in silos and containers from above. With its flexible device configuration and comprehensive range of accessories, the DF26 adapts precisely to your requirements, ensuring reliable level monitoring at all times.
MOLOSroto DF27
The MOLOSroto DF27 level measuring device is installed from above using its suspended cable shaft. Whether as a full indicator, empty indicator, or demand indicator, this versatile level sensor adapts perfectly to your applications thanks to its individual configuration options and extensive range of accessories. This ensures that you always have reliable monitoring of the fill level and interface level.
MOLOSroto DF28
Thanks to its protective tube, the MOLOSroto DF28 is particularly impressive as a full indicator in silos and containers with heavy bulk solids. Special configuration options allow this level indicator to be used up to 500 °C, for level monitoring even in the filling flow or as a level indicator with manual height adjustment.
MOLOSroto DF30
The MOLOSroto DF30 rotary paddle detector specializes in full detection in the closure cones of loading bellows. The limit switch with a short process connection for powdery, granulated, and coarse-grained bulk solids reliably signals as soon as the truck is fully loaded. Thanks to various configuration options, this full detector adapts perfectly to your specific applications.
MOLOSroto RF11
The MOLOSroto RF11 is an inexpensive solution for checking the fill level of granulates or pellets. It is suitable as a full, empty or demand indicator for the simplest applications. The RF11 can be adapted to your application with a number of options.
MOLOSswim TA
The MOLOSswim TA is an extremely inexpensive and very versatile float switch that allows you to monitor the limit level of water easily and without additional energy consumption. It is particularly impressive due to its simple handling and reliability.
MOLOSvibro VF12
The MOLOSvibro VF12 is your reliable partner for level measurement in dusty and powdery, granulated, and granular bulk solids. Whether as a full indicator, empty indicator, or demand indicator, this robust level indicator with rhombus vibrating rod ensures reliable and precise measurement in many applications. This sensor is also suitable for detecting interface levels.
MOLOSvibro VF13
The MOLOSvibro VF13 is ideal for level measurement in dusty, powdery, granular and grainy bulk solids. With a probe length of up to 2 m, it offers the flexibility you need for fail-safe level monitoring.
MOLOSvibro VF15
The MOLOSvibro VF15 level indicator is suitable for use as a full indicator, empty indicator, and demand indicator for vertical installation in silo or container roofs. This level sensor provides reliable measurement results in dusty and powdery, granulated, and granular bulk solids, as well as for measuring interface layers. The suspension cable probe has a maximum length of 8,000 mm, and a length of up to 20,000 mm is possible for interface measurements only.
MOLOSvibro VF62
The MOLOSvibro VF62 is a very compact measuring device for level detection in bulk solids. This sensor is also suitable for measuring the interface between solids and liquids. Its design enables reliable measurement even in confined installation spaces, making it the ideal choice for smaller containers and hoppers.
MOLOSvibro VF63
The MOLOSvibro VF63 with mini vibrating rod is ideal for precise level monitoring in bulk solids. With a probe of up to 1 m in length, this full, empty or demand indicator offers a high degree of flexibility.
MOLOSvibro VF65
The MOLOSvibro VF65 offers reliable level indication in dusty, powdery and granulated bulk solids. With a suspension cable probe that reaches a maximum length of 4 m, it has the flexibility required for your application.
MOLOSvisu EI2041
The MOLOSvisu EI2041 visualization system is the perfect addition to your MOLOSbob and MOLOSwave measuring devices. The EI2041 impresses with its ease of use and two relay outputs that can be switched for different fill levels. This means you always have a precise overview of your fill levels and can react flexibly.
MOLOSvisu VB20
The MOLOSvisu VB20 web server visualizes current fill levels in real time on any web-enabled device. Perfectly matched to the MOLOSbob and MOLOSwave series, it not only offers a continuous fill level display, but also the option of monitoring the switching status of eight digital inputs and controlling five digital outputs.
MOLOSvisu W070
The compact MOLOSvisu W070 viewing window made of crystal-clear Makrolon provides an extremely cost-effective and reliable level indicator, even where installation space is very limited. It is mounted directly in the storage tank or with a suitable flange.
MOLOSwave MWF27
MOLOSwave MWF has been specially developed for continuous level measurement in bulk solids (DK value > 1.8). Transmitted microwave pulses are reflected on the surface of the bulk solids and the level determined via the time difference between the transmitted and received signal is output as a 4-20 mA signal, which is displayed with our visualization systems.
screw-in transmitter LMK 331 level measurement
screw-in transmitter LMK 331 level measurement
screw-in transmitter LMK 351
screw-in transmitter LMK 351