Серия Interface modules
30 варианта от SICK. Изберете модела, който отговаря на приложението ви, или попитайте нас.
3D belt pick accessory set
Integration modules and adapters | Interface modules | 3D belt pick accessory set | Description: 3D belt pick accessory set with 5 m power I/O cable, 5 m gigabit Ethernet cable, 5 m sensor/actuator cable, encoder terminal and mounting bracket for TriSpectorP1000
3D Belt Pick Ruler3000 Bundle Accessory Kit
Integration modules and adapters | Interface modules | 3D Belt Pick Ruler3000 Bundle Accessory Kit | Description: The 3D Belt Pick Ruler3000 Bundle Accessory Kit includes a power I/O cable, a power module, a Gigabit Ethernet cable, a sensor/actuator cable, an encoder terminal, a 4Dpro connection module and a mounting bracket.
Access point
Integration modules and adapters | Interface modules | Access point | Description: Access point, Bluetooth class 1 (Honeywell AP-100BT-07N)
BAM100-HE44K
Integration modules and adapters | Interface modules | BAM100-HE44K | Description: BAM100 analog module for Bulkscan, by Beckhoff, 24 V DC supply voltage (-15% / + 20%), rail mounting on 35 mm C rail, according to EN 50022 with interlocking, Ethernet TCP/IP interface (RJ45), CoLa communication, 3 x IN: 4 mA ... 20 mA, 4 x OUT: 4 mA ... 20 mA
CDE50-02462
Junction boxes | Interface modules | CDE50-02462 | Brief description: Connection of a SICK sensor in a Power-over-Ethernet (PoE) environment. Splitting of PoE signal into 24 volt supply voltage and Ethernet. A power supply for heating sensors can optionally be connected (e.g., for LMS511, LMS531). Suitable for use in indoor and outdoor applications with a low corrosive environment. The material of the sensor plug and the PoE connection module should be equivalent. The connection module is equipp
CDE50-03462
Junction boxes | Interface modules | CDE50-03462 | Brief description: Connection of a SICK sensor in a Power-over-Ethernet (PoE) environment. Splitting of PoE signal into 24 volt supply voltage and Ethernet. A power supply for heating sensors can optionally be connected (e.g., for LMS511, LMS531). Suitable for use in outdoor applications. Suitable for sensors with stainless steel plugs. The connection module is equipped with cable glands made of nickel-plated brass and externally resistant PE-X
ECU1-1111AAAZZZ
Integration modules and adapters | Interface modules | ECU1-1111AAAZZZ | Description: External, passive control unit with one pushbutton and three LEDs; cable with male connector M8, 4-pin; cable material: PUR; housing material: plastic, TPU, reinforced; supply voltage: DC 10 V DC ... 30 V DC; current Imax.: 510 mA; protection class: III (EN 61140); EMC: EN 61000-6-2, EN 61000-6-4; ambient temperature operation: –25 °C ... +55 °C; ambient temperature storage: –25 °C ... +70 °C
ECU1-2121AAAZZZ
Integration modules and adapters | Interface modules | ECU1-2121AAAZZZ | Description: External, passive control unit with one pushbutton and three LEDs. Cable with male connector M12, 4-pin; cable material: PUR; housing material: plastic, TPU, reinforced; supply voltage: DC 10 V DC ... 30 V DC; current Imax.: 510 mA; protection class: III (EN 61140); EMC: EN 61000-6-2, EN 61000-6-4; ambient temperature operation: –25 °C ... +55 °C; ambient temperature storage: –25 °C ... +70 °C
ECU1-2121AABZZZ
Integration modules and adapters | Interface modules | ECU1-2121AABZZZ | Description: External, passive control unit with one pushbutton and three LEDs; cable with male connector M12, 4-pin; PLC: pin 2 and pin 4 swapped; cable material: PUR; housing material: plastic, TPU, reinforced; supply voltage: DC 10 V DC ... 30 V DC; current Imax.: 510 mA; protection class: III (EN 61140); EMC: EN 61000-6-2, EN 61000-6-4; ambient temperature operation: –25 °C ... +55 °C; ambient temperature storage: –25 °
Encoder splitter
Integration modules and adapters | Interface modules | Encoder splitter | Description: Encoder splitter for connection of up to eight devices to one encoder
Ethernet switch
Integration modules and adapters | Interface modules | Ethernet switch | Description: Outdoor Ethernet switch, 5 ports
Ethernet switch
Integration modules and adapters | Interface modules | Ethernet switch | Description: Outdoor Ethernet-Switch, 8 ports, operating temperature range –40 °C ... +75 °C
FCA-BZZ2A1A1
Integration modules and adapters | Interface modules | FCA-BZZ2A1A1 | Description: FlexChain Booster
FX3-EBX100002
Integration modules and adapters | Interface modules | FX3-EBX100002
FX3-EBX300002
Integration modules and adapters | Interface modules | FX3-EBX300002
FX3-EBX400002
Integration modules and adapters | Interface modules | FX3-EBX400002
FX3-EBX400012
Integration modules and adapters | Interface modules | FX3-EBX400012
I/O extension module, 2 digital inputs
Integration modules and adapters | Interface modules | I/O extension module, 2 digital inputs | Description: I/O extension module to extend the number of digital inputs in combination with I/O extension box. Number of digital inputs: 2, only to use with 6037654
I/O extension module, 8 outputs
Integration modules and adapters | Interface modules | I/O extension module, 8 outputs | Description: Add-on terminal for I/O extension module, number of outputs: 8, only in use with accessory 6037654
Infrarot-/USB-Adapter HIE-04
Integration modules and adapters | Interface modules | Infrarot-/USB-Adapter HIE-04 | Description: Infrared/USB adapter HIE-04; Data transfer up to 38400 baud; USB 2.0; cable length 2,25 m; ATEX II 2G Ex mb IIC T4; Protection class IP30; Operating temperature –25 to +60°C | –13 to +140°F
IO-LINK STARTER KIT
Integration modules and adapters | Interface modules | IO-LINK STARTER KIT | Description: IO-Link V1.1 Class A port, USB2.0 port, optional external power supply 24V / 1A
Junction box
Integration modules and adapters | Interface modules | Junction box | Description: Relay connection box for wiring voltage supply and I/Os as well as four volt-free outputs; with cover contact.
Network switch
Integration modules and adapters | Interface modules | Network switch | Description: Network switch for MSC800 for image output
REST API
Integration modules and adapters | Interface modules | REST API | Description: Enables access to the device data of IO-Link sensors originating from third-party tools; compatible with FieldEcho®
W-Lan adapter
Integration modules and adapters | Interface modules | W-Lan adapter | Description: WLAN adapter from Phoenix Contact
WI180C-IOA00
Integration modules and adapters | Interface modules | WI180C-IOA00 | Description: IO-Link Smart Sensor Gateway for WLL180T, KTL180 and AOD1; Features: IO-Link; COM3; M8 connection, 4-pin; full read/write functionality for the process and service data of the connected sensors. See operating instructions for additional information and technical details
WI180C-IOB01
Integration modules and adapters | Interface modules | WI180C-IOB01 | Description: IO-Link Smart Sensor Gateway for WLL180T, KTL180 and AOD1; Features: IO-Link; COM3; M8 connection, 4-pin; full read/write functionality for the process and service data of the connected sensors. See operating instructions for additional information and technical details
ZIM-2B2110
Integration modules and adapters | Interface modules | ZIM-2B2110 | Description: Full Function interface module for WTR, 300mm upstream male cabe, 300mm downstream female cable
ZIM-2B2120
Integration modules and adapters | Interface modules | ZIM-2B2120 | Description: Release interface module for WTR, 300mm upstream male cable, 30mm downstream female cable
ZIM-2B2130
Integration modules and adapters | Interface modules | ZIM-2B2130 | Description: Zone Status interface module for WTR, 300mm upstream male cable 300mm downstream female cable