Търсене в каталога
41538 резултата за "SICK" · стр. 553/2077
AFS60E-BEAC001024
Absolute encoders | AFS/AFM60 SSI | AFS60E-BEAC001024 | Singleturn or multiturn version: Singleturn | Number of steps per revolution: 1,024 (10 bit) | Mechanical design: Blind hollow shaft 12 mm (Front clamp) | Communication interface: SSI, non programmable | Connection type: Male connector, M12, 8-pin, radial
L41S-21MA1B
Safety light-beam sensors | L41 | L41S-21MA1B | System part: Sender | Safety level: PL e, SIL 3, Type 4 | Scanning range: 16 m | Diameter: M18 | Light source: LED | Type of light: Visible red light | Optical axis: Axial | Housing material: Nickel-plated brass | Connection type: Male connector M12, 4-pin
DFS60E-BDAA02048
Incremental encoders | DFS60 | DFS60E-BDAA02048 | Mechanical design: Blind hollow shaft 10 mm (Front clamp) | Communication interface: 4.5 V ... 5.5 V, TTL, RS-422 | Connection type: Male connector, M23, 12-pin, radial | Pulses per revolution: 2,048
PBT-RB010SG1SENALA0Z
Pressure sensors | PBT | PBT-RB010SG1SENALA0Z | Pressure type: Gauge pressure | Pressure unit: bar | Measuring range: 0 bar ... 10 bar | Accuracy: ≤ ± 1 %, of the span (including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement as per IEC 61298-2)) | Process connection: G ¼ A (ISO 1179-2) | Pressure port: Standard | Process temperature: –30 °C ... +100 °C | Seal: NBR | Communication interface: - | Output signal: 4 mA ... 20 mA, 2-wire | Connection t
DBS60E-TFAC00100
Incremental encoders | DBS60 | DBS60E-TFAC00100 | Mechanical design: Through hollow shaft 1/2″ (Front clamp) | Communication interface: 4.5 V ... 5.5 V, TTL, RS-422 | Connection type: Male connector, M12, 8-pin, radial | Pulses per revolution: 100 | Flange type / stator coupling: 2-sided stator coupling, slot, screw hole circle 63–83 mm
DFS60B-BEWA00020
Incremental encoders | DFS60 | DFS60B-BEWA00020 | Mechanical design: Blind hollow shaft 12 mm (Front clamp) | Communication interface: 4.5 V ... 32 V, HTL, Push pull | Connection type: Male connector, M23, 12-pin, radial | Pulses per revolution: 20
DBS60E-T3FPD1024
Incremental encoders | DBS60 | DBS60E-T3FPD1024 | Mechanical design: Through hollow shaft 3/8″ (Front clamp) | Communication interface: 4.5 V ... 30 V, TTL, HTL, HTL | Connection type: Cable, 8-wire, with male connector, M12, 8-pin, universal, 0.5 m | Pulses per revolution: 1,024 | Flange type / stator coupling: 1-sided stator coupling, slot, screw hole circle radius 31.5–48.5 mm
P250 CHEM
Reflectors and optics | Reflectors | P250 CHEM | Description: Chemically resistant, screw connection | Dimensions: 51 mm 7.9 mm 60.8 mm | Ambient operating temperature: –20 °C ... +140 °C
MLG05W-0212N12501
Automation light grids | MLG-2 WebChecker | MLG05W-0212N12501 | Device version: Web guiding | Option: None | Beam separation: 5 mm | Operating range: 2.5 m | Total measuring field width: 745 mm | Measuring field width detail (connection side/medium range/head side): 295 mm / 155 mm / 295 mm | Length of cable: 0.22 m, 0.27 m | Response time: 24.9 ms | Software feature (default setting - see technical data/features): 01
AFM60S-TBSA262144
Safety encoders | AFS/AFM60S Pro | AFM60S-TBSA262144 | Safety integrity level: SIL 3 (IEC 61508, IEC 61800-5-3) | Performance level: PL e (EN ISO 13849-1) | Singleturn or multiturn version: Multiturn | Max. resolution: 18 bit x 12 bit (262,144 x 4,096) | Mechanical design: Through hollow shaft 8 mm (with feather key groove) | Communication interface: SSI, SSI + Sin/Cos, programmable | Connection type: Male connector, M23, 12-pin, radial
DFS60E-BAEK00250
Incremental encoders | DFS60 | DFS60E-BAEK00250 | Mechanical design: Blind hollow shaft 6 mm (Front clamp) | Communication interface: 10 V ... 32 V, HTL, Push pull | Connection type: Cable, 8-wire, universal, 1.5 m | Pulses per revolution: 250
DAXLAN-1850BA0C0000V01
Linear encoders | DAX | DAXLAN-1850BA0C0000V01 | Design: DAX Low Profile | Communication interface: - / Current | Current output: 4 mA ... 20 mA | Connection type: Male connector, M12, 8-pin | Measurement range: 0 mm ... 1,850 mm | Supply voltage: 24 V DC (± 20%) | Unusable range (zero zone/damping zone): 55 mm / 63 mm | Magnet type: Small block magnet MAG-B-180-01
VL180-2N41136
Photoelectric sensors | V180 | VL180-2N41136 | Functional principle: Photoelectric retro-reflective sensor | Functional principle detail: With minimum distance to reflector (dual lens system) | Switching output: NPN | Switching mode: Light/dark switching | Connection type: Cable, 4-wire, 2 m | Light source: LED | Adjustment: Potentiometer | Communication interface: - | Included with delivery: Reflector P250, fastening nuts (2 x)
SLG10S-060SAKA1K01
Automation light grids | FlexChain | SLG10S-060SAKA1K01 | Device version: FlexChain Guest | Optical light exit: Slim | Beam separation: 10 mm | Operating range: 4 m | Detection height: 600 mm | Length of cable: 0.5 m
Optics protection hood (glass)
Reflectors and optics | Lenses | Optics protection hood (glass) | Description: Optics protection hood, glass, 57.6 mm, for use with basic 5 megapixel devices and lenses with focal lengths of 12 mm (part no. 5342133), 16 mm (part no. 5342134) or 25 mm (part no. 5342135)
DFS60B-S4EC08192
Incremental encoders | DFS60 | DFS60B-S4EC08192 | Mechanical design: Solid shaft face mount flange 10 mm x 19 mm (With flat) | Communication interface: 10 V ... 32 V, HTL, Push pull | Connection type: Male connector, M12, 8-pin, radial | Pulses per revolution: 8,192
WTB26I-1H161120A00
Photoelectric sensors | W26 | WTB26I-1H161120A00 | Sensing range min. / max.: 30 mm / 2,000 mm | Functional principle: Photoelectric proximity sensor | Functional principle detail: Background suppression | Switching output: Push-pull: PNP/NPN | Switching mode: Light/dark switching | Connection type: Cable, 4-wire, 2 m | Light source: LED | Type of light: Infrared light | Housing material: VISTAL® | Adjustment: Teach-in button, IO-Link, Potentiometer, Teach-Turn adjustment | Communication interfa
PBT-RBX60SG4SSCVMC0Z
Pressure sensors | PBT | PBT-RBX60SG4SSCVMC0Z | Pressure type: Gauge pressure | Pressure unit: bar | Measuring range: 0 bar ... 0.6 bar | Accuracy: ≤ ± 1 %, of the span (including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement as per IEC 61298-2)) | Process connection: G ¼ B (EN 837) | Pressure port: Standard | Process temperature: 0 °C ... +80 °C | Seal: Copper | Communication interface: - | Output signal: 0 V ... 10 V, 3-wire | Connection type:
LL3-TS15S01
Fiber-optic sensors | Fiber-optic cables | LL3-TS15S01 | Functional principle: Through-beam system | Fiber-optic head design: Flat type, 90° deflection, Array | Fiber length: 1,410 mm | Fiber-optic head array width: 50 mm | Fiber material: Plastic | Jacket material: Plastic | Fiber head material: Aluminum | Included with delivery: FC fiber cutter (5304141)
DFS60A-TFPM65536
Incremental encoders | DFS60 | DFS60A-TFPM65536 | Mechanical design: Through hollow shaft 1/2″ (Front clamp) | Communication interface: 4.5 V ... 32 V, TTL, HTL, programmable | Connection type: Cable, 8-wire, universal, 5 m | Pulses per revolution: 65,536