Търсене в каталога
41538 резултата за "SICK" · стр. 501/2077
Protective cover for optics
Reflectors and optics | Lenses | Protective cover for optics | Description: Optics protection hood, enclosure rating IP 67, length: 69 mm, PMMA, for use with ICL illumination unit
BCV08-A1NM03M400
Wire draw encoders | VarioLine | BCV08-A1NM03M400 | Measuring range: 0 m ... 3 m | Communication interface: SSI | Supply voltage: 4.5 V DC ... 32 V DC | Connection type: Male connector, M12, 8-pin, universal | Mounted encoder: AHM36 SSI, AHM36A-S3PC013X12, 1068330 | Mounted mechanic: MRA-V080-103D3, 5347779 | Programmable/configurable: yes
PBS2-AB016SF2FSDLMA0Z
Pressure sensors | PBS plus | PBS2-AB016SF2FSDLMA0Z | Pressure type: Absolute pressure | Pressure unit: bar psi | Measuring range: 0 bar ... 16 bar, 0 psi ... 232 psi | Accuracy: ≤ ± 0.5 %, of the span (including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement as per IEC 61298-2)) | Process connection: G ½ B flush mounted | Pressure port: Front-flush membrane | Process temperature: –20 °C ... +85 °C | Seal: NBR | Communication interface: IO-Link |
DBS60E-TGCCD1024
Incremental encoders | DBS60 | DBS60E-TGCCD1024 | Mechanical design: Through hollow shaft 14 mm (Front clamp) | Communication interface: 10 V ... 30 V, TTL, RS-422 | Connection type: Male connector, M12, 8-pin, radial | Pulses per revolution: 1,024 | Flange type / stator coupling: 1-sided stator coupling, slot, screw hole circle radius 31.5–48.5 mm
DBS60E-RHFC00100
Incremental encoders | DBS60 | DBS60E-RHFC00100 | Mechanical design: Through hollow shaft 15 mm (rear clamping) | Communication interface: 4.5 V ... 30 V, TTL, HTL, HTL | Connection type: Male connector, M12, 8-pin, radial | Pulses per revolution: 100 | Flange type / stator coupling: 2-sided stator coupling, slot, screw hole circle 63–83 mm
HTE18-A3A1BB
Photoelectric sensors | H18 Sure Sense | HTE18-A3A1BB | Device version: Standard | Communication interface: - | Mounting system type: M18, head/side (24.1 … 25.4 mm) | Sensor/ detection principle: Photoelectric proximity sensor, Energetic | Sensing range: 1,000 mm | Light source, light type: LED, Infrared light | Voltage type: DC | Switching output Q1: PNP, Dark switching | Switching output Q2: NPN, Dark switching | Potentiometer, right: Sensitivity | Potentiometer, left: None | Connection type:
IHM06-02BPSVW2KS02
Inductive proximity sensors | IMM | IHM06-02BPSVW2KS02 | Housing: Short-body | Sensing range Sn: 2 mm | Installation type: Flush | Electrical wiring: DC 3-wire | Switching output: PNP | Output function: NO | Connection type: Cable with Molex plug 2201-3077, socket housing, 7-pin, 2 m | Special features: Visual adjustment indicator
GRTB18-N1112
Photoelectric sensors | GR18 | GRTB18-N1112 | Functional principle: Photoelectric proximity sensor | Functional principle detail: Background suppression | Switching output: NPN | Switching mode: Light/dark switching | Connection type: Cable, 4-wire, 2 m | Light source: PinPoint LED | Adjustment: Potentiometer | Communication interface: - | Included with delivery: Fastening nuts (2 x)
PBT-RB6X0SG4SS0AMA0Z
Pressure sensors | PBT | PBT-RB6X0SG4SS0AMA0Z | Pressure type: Gauge pressure | Pressure unit: bar | Measuring range: 0 bar ... 6 bar | Accuracy: ≤ ± 1 %, of the span (including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement as per IEC 61298-2)) | Process connection: G ¼ B (EN 837) | Pressure port: Standard | Process temperature: 0 °C ... +80 °C | Seal: Without seal | Communication interface: - | Output signal: 4 mA ... 20 mA, 2-wire | Connection
SLG10S-020SER21D2D
Automation light grids | SLG-2 | SLG10S-020SER21D2D | Optical light exit: Slim | Beam separation: 10 mm | Operating range: 1.5 m | Detection height: 200 mm | Length of cable: 150 mm
DFS60A-TEPA65536
Incremental encoders | DFS60 | DFS60A-TEPA65536 | Mechanical design: Through hollow shaft 12 mm (Front clamp) | Communication interface: 4.5 V ... 32 V, TTL, HTL, programmable | Connection type: Male connector, M23, 12-pin, radial | Pulses per revolution: 65,536
AFM60B-THAK008192
Absolute encoders | AFS/AFM60 SSI | AFM60B-THAK008192 | Singleturn or multiturn version: Multiturn | Max. resolution: 13 bit x 12 bit (8,192 x 4,096) | Mechanical design: Through hollow shaft 15 mm (Front clamp) | Communication interface: SSI, non programmable | Connection type: Cable, 8-wire, universal, 1.5 m
SPL-S280PTS1W04
Automation light grids | SLG | SPL-S280PTS1W04 | Optical light exit: Slim | Aluminum stabilizer: Without stabilizer | Parameterization: None | Beam separation: 40 mm | Cross beam/parallel beam: Parallel beam active | Operating range: 1.5 m | Detection height: 280 mm | Response time: 19 ms
Connecting cable
Connectors and cables | Other connectors and cables | Connecting cable | Description: Shielded | Connection type head A: Male connector, Micro D-Sub, 15-pin, angled | Connection type head B: Flying leads | Cable: 1.1 m | Connection systems: Flying leads | Note: For direct encoder connection
ZSE18-7KZ1G3
Photoelectric sensors | Z18 Simple Sense | ZSE18-7KZ1G3 | Communication interface: - | Mounting system type: Side (24.1 … 25.4 mm) | Sensor/ detection principle: Through-beam photoelectric sensor | Sensing range: 17 m | Light source, light type: LED, Infrared light | Switching output Q1: PNP, Dark switching | Switching output Q2: Not connected | Connection type: Cable open end, 4-wire, 2,000 mm
Spacer
Reflectors and optics | Lenses | Spacer | Description: Spacer for mounting the integratable illumination unit, for use with basic 12 or 9 megapixel devices
IDM160-411S RS-232 Kit
Mobile handheld scanners | IDM | IDM160-411S RS-232 Kit | Readable code structures: 1D codes, Stacked | Reading distance: 20 mm ... 850 mm | Application: Industrial application | Scanner design: Cable connection variant | Note: Additional accessories may be necessary for some communication interfaces (details available online) | Communication interface: Ethernet, PROFINET, EtherCAT®, Serial, PROFIBUS DP | Ambient operating temperature: –10 °C ... +50 °C | Code resolution: ≥ 0.076 mm
AFM60A-S1AA004096
Absolute encoders | AFS/AFM60 SSI | AFM60A-S1AA004096 | Singleturn or multiturn version: Multiturn | Max. resolution: 12 bit x 12 bit (4,096 x 4,096) | Mechanical design: Solid shaft Servo flange 6 mm x 10 mm (With flat) | Communication interface: SSI, non programmable | Connection type: Male connector, M23, 12-pin, radial
IMG18-08BPOZC0K
Inductive proximity sensors | IMG | IMG18-08BPOZC0K | Housing: Short-body | Special applications: Zones with coolants and lubricants, Mobile machines, Difficult application conditions | Sensing range Sn: 8 mm | Installation type: Flush | Electrical wiring: DC 3-wire | Switching output: PNP | Output function: NC | Connection type: Male connector M12, 4-pin | Special features: Resistant against coolant lubricants, Temperature resistance
AFM60S-SGSL262144
Safety encoders | AFS/AFM60S Pro | AFM60S-SGSL262144 | Safety integrity level: SIL 3 (IEC 61508, IEC 61800-5-3) | Performance level: PL e (EN ISO 13849-1) | Singleturn or multiturn version: Multiturn | Max. resolution: 18 bit x 12 bit (262,144 x 4,096) | Mechanical design: Solid shaft Servo flange 6 mm x 10 mm (with feather key) | Communication interface: SSI, SSI + Sin/Cos, programmable | Connection type: Cable, 12-wire, radial, 3 m