Търсене в каталога
41538 резултата за "SICK" · стр. 1605/2077
Lens unit
Reflectors and optics | Lenses | Lens unit | Description: C-mount lens with 1" optic for Ranger cameras, 12.5 mm focal length, F 1.8
DFS60B-BGEA04096
Incremental encoders | DFS60 | DFS60B-BGEA04096 | Mechanical design: Blind hollow shaft 14 mm (Front clamp) | Communication interface: 10 V ... 32 V, HTL, Push pull | Connection type: Male connector, M23, 12-pin, radial | Pulses per revolution: 4,096
SFM60-HRKT2K02
Motor feedback systems | SFS/SFM60 | SFM60-HRKT2K02 | Communication interface: HIPERFACE® | Model: Absolute Multiturn | Type: Stand-alone | Sine/cosine periods per revolution: 1,024 | Safety system: no | Mechanical design: Through hollow shaft | Connection type: Cable, 8-wire (4 x 2 x 0.15 mm²), radial, 1.5 m | Technology: Optical | Operating temperature range: –40 °C ... +115 °C | Items supplied: M3 mounting screws for stator coupling not included with delivery.
ZLD18-6FZ1G2P49
Photoelectric sensors | Z18 Simple Sense | ZLD18-6FZ1G2P49 | Communication interface: - | Mounting system type: M18, head/dovetail mounting | Sensor/ detection principle: Photoelectric retro-reflective sensor, With minimum distance to reflector (dual lens system) | Sensing range: 7.8 m | Light source, light type: PinPoint LED, visible red light | Switching output Q1: PNP, Dark switching | Switching output Q2: Not connected | Connection type: Cable open end, 4-wire, 2,000 mm
PBT-CB2X5AGESECAMA0Z
Pressure sensors | PBT | PBT-CB2X5AGESECAMA0Z | Pressure type: Compound pressure | Pressure unit: bar | Measuring range: –1 bar ... 1.5 bar | Accuracy: ≤ ± 0.5 %, of the span (including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement as per IEC 61298-2)) | Process connection: G ½ B (EN 837) | Pressure port: Standard | Process temperature: –30 °C ... +100 °C | Seal: Copper | Communication interface: - | Output signal: 4 mA ... 20 mA, 2-wire | Connec
YF2A2B-100UD3M2A2B
Connectors and cables | Sensor-actuator cables | YF2A2B-100UD3M2A2B | Description: Sensor/actuator cable, shielded | Connection type head A: Female connector, M12, 12-pin, straight, A-coded | Connection type head B: Male connector, M12, 12-pin, straight, A-coded | Signal type: Sensor/actuator cable | Cable: 10 m, 12-wire, PUR, halogen-free | Application: Drag chain operation, Zones with oils and lubricants, Robot, Drag chain operation
DBS60E-RHAJD1024
Incremental encoders | DBS60 | DBS60E-RHAJD1024 | Mechanical design: Through hollow shaft 15 mm (rear clamping) | Communication interface: 4.5 V ... 5.5 V, TTL, RS-422 | Connection type: Cable, 8-wire, universal, 0.5 m | Pulses per revolution: 1,024 | Flange type / stator coupling: 1-sided stator coupling, slot, screw hole circle radius 31.5–48.5 mm
ARS60-F4R01000
Absolute encoders | ARS60 | ARS60-F4R01000 | Singleturn or multiturn version: Singleturn | Number of steps per revolution: 1,000 | Mechanical design: Solid shaft face mount flange 10 mm x 19 mm (With flat) | Communication interface: Parallel data world | Connection type: Cable, 22-wire, axial, 1.5 m
PBST-RB400SN1SSEQMA0Z
Pressure sensors | PBST | PBST-RB400SN1SSEQMA0Z | Pressure type: Gauge pressure | Pressure unit: bar | Measuring range: 0 bar ... 400 bar | Accuracy: ≤ ± 0.5 % | Process connection: ¼'' NPT | Pressure port: M5 internal thread for pressure spike restrictor | Process temperature: –25 °C ... +100 °C | Seal: EPDM | Communication interface: IO-Link | Output signal: Output 1 (pin 4): PNP/NPN/PP or IO-Link, Output 2 (pin 2): PNP/NPN/PP or analog 4...20 mA, 0...10 V, 1...10 V (each freely scalable up to
DAXLVN-0125BA080000M01
Linear encoders | DAX | DAXLVN-0125BA080000M01 | Design: DAX Low Profile | Communication interface: - / Voltage | Voltage output: 0 V ... 10 V | Connection type: Male connector, M12, 8-pin | Measurement range: 0 mm ... 125 mm | Supply voltage: 24 V DC (± 20%) | Sequence of signals: Signal 1: rising, signal 2: falling | Unusable range (zero zone/damping zone): 55 mm / 63 mm | Magnet type: Small block magnet MAG-B-180-01
DBS60E-BJCJ00100
Incremental encoders | DBS60 | DBS60E-BJCJ00100 | Mechanical design: Blind hollow shaft 5/8″ (Front clamp) | Communication interface: 10 V ... 30 V, TTL, RS-422 | Connection type: Cable, 8-wire, universal, 0.5 m | Pulses per revolution: 100 | Flange type / stator coupling: 2-sided stator coupling, slot, screw hole circle 63–83 mm
MAX30N-72V30ME0500
Linear encoders | MAX | MAX30N-72V30ME0500 | Type: Ø 30 mm 31f7 - IN Cylinder Mounting Ø31H8 | Pipe diameter / Damping zone / End cap: 30 mm / Flat | Supply voltage: 24 V DC (+8 V DC ... +32 V DC) | Communication interface: - / Voltage | Connection type: Male connector, M12 type S (20x20 mm), 4-pin | Measuring range: 0 mm ... 500 mm | Output signal: 0.5 V DC ... 9.5 V DC
GRTE18S-N2437
Photoelectric sensors | GR18 | GRTE18S-N2437 | Functional principle: Photoelectric proximity sensor | Functional principle detail: Energetic | Switching output: NPN | Switching mode: Light/dark switching | Connection type: Male connector M12, 4-pin | Light source: LED | Adjustment: Potentiometer | Communication interface: - | Included with delivery: Fastening nuts (2 x)
MLG05A-0895I10850
Automation light grids | MLG-2 | MLG05A-0895I10850 | Device version: Pro - Extended functionality | Inputs/outputs: RS-485 + 2 x Q (IO-Link) | Option: None | Beam separation: 5 mm | Operating range: 8.5 m | Detection height: 895 mm | Length of cable: 0.22 m, 0.27 m, 0.19 m | Response time: 15.2 ms | Software feature (default setting - see technical data/features): 50
IHM04-1B5PSVT0S
Inductive proximity sensors | IMM | IHM04-1B5PSVT0S | Housing: Standard design | Sensing range Sn: 1.5 mm | Installation type: Flush | Electrical wiring: DC 3-wire | Switching output: PNP | Output function: NO | Connection type: Connector M8, 3-pin | Special features: Visual adjustment indicator
PBT-RB1X0SG2SS0VMC0Z
Pressure sensors | PBT | PBT-RB1X0SG2SS0VMC0Z | Pressure type: Gauge pressure | Pressure unit: bar | Measuring range: 0 bar ... 1 bar | Accuracy: ≤ ± 1 %, of the span (including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement as per IEC 61298-2)) | Process connection: G ¼ female (EN 837) | Pressure port: Standard | Process temperature: 0 °C ... +80 °C | Seal: Without seal | Communication interface: - | Output signal: 0 V ... 10 V, 3-wire | Connecti
ARS60-J4B00100
Absolute encoders | ARS60 | ARS60-J4B00100 | Singleturn or multiturn version: Singleturn | Number of steps per revolution: 100 | Mechanical design: Solid shaft face mount flange 10 mm x 19 mm (With flat) | Communication interface: Parallel data world | Connection type: Male connector, M23, 21-pin, axial
BEF-MS12L-S02
Mounting systems | Brackets | BEF-MS12L-S02 | Description: Mounting bar, L-shaped, 100 mm x 170 mm | Material: Steel | Details: Steel, zinc coated
MLG30A-3120R10801
Automation light grids | MLG-2 | MLG30A-3120R10801 | Device version: Pro - Extended functionality | Inputs/outputs: 4 x Q (IO-Link) | Option: None | Beam separation: 30 mm | Operating range: 8.5 m | Detection height: 3,120 mm | Length of cable: 0.22 m, 0.27 m, 0.19 m | Response time: 9.4 ms | Software feature (default setting - see technical data/features): 01
DBS60E-RDAQD1024
Incremental encoders | DBS60 | DBS60E-RDAQD1024 | Mechanical design: Through hollow shaft 10 mm (rear clamping) | Communication interface: 4.5 V ... 5.5 V, TTL, RS-422 | Connection type: Cable, 8-wire, with male connector, M23, 12-pin, universal, 0.5 m | Pulses per revolution: 1,024 | Flange type / stator coupling: 1-sided stator coupling, slot, screw hole circle radius 31.5–48.5 mm