Търсене в каталога
41538 резултата за "SICK" · стр. 1523/2077
DAXLON-2500B20C0001300
Linear encoders | DAX | DAXLON-2500B20C0001300 | Design: DAX Low Profile | Communication interface: CANopen | Baud rate: 250 kbit/s | Node ID: 7Fh (127) | Connection type: Male connector, M12, 5-pin | Resolution: 50 µm | Measurement range: 0 mm ... 2,500 mm | Supply voltage: 24 V DC (± 20%) | Unusable range (zero zone/damping zone): 55 mm / 63 mm | Magnet type: Small block magnet MAG-B-180-01
TR10-SRU03P
Safety switches | TR10 Lock | TR10-SRU03P | Locking principle: Power to release | Locking force FZh: 1,300 N | Coding: Uniquely coded | Connection type Detail: Cable | Length of cable: 3 m | Safe series connection: In control cabinet (with diagnostics)
MLG05W-0E00I12501
Automation light grids | MLG-2 WebChecker | MLG05W-0E00I12501 | Device version: Web guiding | Inputs/outputs: RS-485 + 2 x Q (IO-Link) | Option: None | Beam separation: 5 mm | Operating range: 2.5 m | Total measuring field width: 2,095 mm | Measuring field width detail (connection side/medium range/head side): 2,095 mm / 0 mm / 0 mm | Length of cable: 0.22 m, 0.27 m, 0.19 m | Response time: 84 ms | Software feature (default setting - see technical data/features): 01
YG2A64-020UE1XLEAX
Connectors and cables | Power cables | YG2A64-020UE1XLEAX | Description: Power, shielded | Connection type head A: Female connector, M12, 4-pin, angled, A-coded | Connection type head B: Flying leads | Signal type: Power | Cable: 2 m, 4-wire, PUR, halogen-free | Application: Drag chain operation, Zones with oils and lubricants, Robot, cold bending resistant, seawater resistant, cold bending resistant
ZLD18-4NZ4A8
Photoelectric sensors | Z18 Simple Sense | ZLD18-4NZ4A8 | Communication interface: - | Mounting system type: M18, head/M18, base | Sensor/ detection principle: Photoelectric retro-reflective sensor, With minimum distance to reflector (dual lens system) | Sensing range: 5 m | Light source, light type: LED, visible red light | Switching output Q1: NPN, Light switching | Switching output Q2: Not connected | Connection type: Male connector M12, 4-pin
SE1-ST1A20
Safety switches | safeIDS | SE1-ST1A20 | IO-Link Safety: IO-Link Safety V1.1.4 | Active sensor surface: Top | Assured switch on distance Sao: 10 mm | Connection type Detail: Plug, M12, 4-pin, A-coded | Note: The actuator has to be ordered separately. See "Accessories" for further details., Because no parameter configuration is required, there is no “dedicated tool” for this product.
MLG05W-0666H12501
Automation light grids | MLG-2 WebChecker | MLG05W-0666H12501 | Device version: Web guiding | Option: None | Beam separation: 5 mm | Operating range: 2.5 m | Total measuring field width: 2,695 mm | Measuring field width detail (connection side/medium range/head side): 895 mm / 905 mm / 895 mm | Length of cable: 0.22 m, 0.27 m | Response time: 72.2 ms | Software feature (default setting - see technical data/features): 01
OD2-P85W20U0
Laser distance sensors | OD Value | OD2-P85W20U0 | Communication interface: - | Digital output: 2 x PNP | Type of analog output: Voltage output | Measuring range: 65 mm ... 105 mm | Repeatability: 10 µm | Laser class: 2 | Typ. light spot size (distance): 0.8 mm x 1.3 mm (85 mm) | Housing material: Plastic | Connection type: Male connector, M12, 8-pin, swivel connector unit
GTB2S-P1311
Photoelectric sensors | G2 | GTB2S-P1311 | Functional principle: Photoelectric proximity sensor | Functional principle detail: Background suppression | Switching output: PNP | Switching mode: Light switching | Connection type: Cable, 3-wire, 2 m | Light source: PinPoint LED | Adjustment: None | Communication interface: -
DSL-1205-G02MS01
Connectors and cables | Other connectors and cables | DSL-1205-G02MS01 | Description: Sensor/actuator cable, Resistor 10 kΩ between pin 3 and pin 5 male connector, unshielded | Connection type head A: Female connector, M12, 2-pin, straight, A-coded | Connection type head B: Male connector, round plug, 5-pin, straight | Signal type: Sensor/actuator cable | Cable: 2 m, 5-wire, PVC
DBS60E-B6EJC1024
Incremental encoders | DBS60 | DBS60E-B6EJC1024 | Mechanical design: Blind hollow shaft 1/2″ (Front clamp) | Communication interface: 10 V ... 27 V, HTL, Push pull | Connection type: Cable, 8-wire, universal, 0.5 m | Pulses per revolution: 1,024 | Flange type / stator coupling: Axial and radial register pin mounting, for 4 mm register pin
ARS60-FDA08192
Absolute encoders | ARS60 | ARS60-FDA08192 | Singleturn or multiturn version: Singleturn | Number of steps per revolution: 8,192 (13 bit) | Mechanical design: Through hollow shaft 12 mm (Front clamp) | Communication interface: Parallel data world | Connection type: Male connector, M23, 21-pin, radial
AFM60S-SHSI262144
Safety encoders | AFS/AFM60S Pro | AFM60S-SHSI262144 | Safety integrity level: SIL 3 (IEC 61508, IEC 61800-5-3) | Performance level: PL e (EN ISO 13849-1) | Singleturn or multiturn version: Multiturn | Max. resolution: 18 bit x 12 bit (262,144 x 4,096) | Mechanical design: Solid shaft face mount flange 10 mm x 19 mm (With flat) | Communication interface: SSI, SSI + Sin/Cos, programmable | Connection type: Cable, 12-wire, axial, 0.5 m
HTF18L-N1G5BB
Photoelectric sensors | H18 Sure Sense | HTF18L-N1G5BB | Device version: Standard | Communication interface: - | Mounting system type: M18, head/side (24.1 … 25.4 mm) | Sensor/ detection principle: Photoelectric proximity sensor, Foreground suppression | Sensing range: 300 mm | Light source, light type: Laser, visible red light | Voltage type: DC | Switching output Q1: NPN, Light switching | Switching output Q2: NPN, Dark switching | Potentiometer, right: Sensitivity | Potentiometer, left: None
MAX30N-72C7FCP0600
Linear encoders | MAX | MAX30N-72C7FCP0600 | Type: Ø 30 mm 31f7 - IN Cylinder Mounting Ø31H8 | Pipe diameter / Damping zone / End cap: 30 mm / Flat | Supply voltage: 24 V DC (+8 V DC ... +32 V DC) | Communication interface: CANopen | Connection type: Male connector, M12 type S (20x20 mm), 5-pin | Measuring range: 0 mm ... 600 mm
DFS25A-A2BDD018000
Incremental encoders | DFS2x | DFS25A-A2BDD018000 | Mechanical design: Solid shaft Square flange 3/8″ x 19 mm (With flat) | Communication interface: 8 V ... 30 V, HTL, Push pull, non programmable | Connection type: Male connector, MS, 10-pin, radial | Pulses per revolution: 18,000
Cable gland
Connectors and cables | Other connectors and cables | Cable gland | Note: Suitable for deTec4 Core Ex, C4000 Advanced Ex and C4000 Fusion Ex safety light curtains
TR10-SLU03P
Safety switches | TR10 Lock | TR10-SLU03P | Locking principle: Power to lock | Locking force FZh: 1,300 N | Coding: Uniquely coded | Connection type Detail: Cable | Length of cable: 3 m | Safe series connection: In control cabinet (with diagnostics)
DBS60E-T1ACC1024
Incremental encoders | DBS60 | DBS60E-T1ACC1024 | Mechanical design: Through hollow shaft 6 mm (Front clamp) | Communication interface: 4.5 V ... 5.5 V, TTL, RS-422 | Connection type: Male connector, M12, 8-pin, radial | Pulses per revolution: 1,024 | Flange type / stator coupling: Axial and radial register pin mounting, for 4 mm register pin
DBS60E-REFA00100
Incremental encoders | DBS60 | DBS60E-REFA00100 | Mechanical design: Through hollow shaft 12 mm (rear clamping) | Communication interface: 4.5 V ... 30 V, TTL, HTL, HTL | Connection type: Male connector, M23, 12-pin, radial | Pulses per revolution: 100 | Flange type / stator coupling: 2-sided stator coupling, slot, screw hole circle 63–83 mm