Търсене в каталога
41538 резултата за "SICK" · стр. 1490/2077
MLG30N-0870U10501
Automation light grids | MLG-2 | MLG30N-0870U10501 | Device version: ProNet - Replacement product (for MLG-1 with terminals) | Inputs/outputs: RS-485 + 6 x Q + 2 x I/O | Option: None | Beam separation: 30 mm | Operating range: 5 m | Detection height: 870 mm | Length of cable: 0.22 m, 0.21 m | Response time: 3.6 ms | Software feature (default setting - see technical data/features): 01
BEF-FA-LB1210
Mounting systems | Assembly accessories | BEF-FA-LB1210 | Description: Bearing block for servo and face mount flange encoder. The heavy-duty bearing block is used to absorb very large radial and axial shaft loads. Particularly when using belt pulleys, chain sprockets, friction wheels. Operating speed max. 4,000 rpm^-1, axial shaft load 150 N, radial shaft load 250 N, bearing service life 3.6 x 10^9 revolutions
DBS60E-R5FAD1024
Incremental encoders | DBS60 | DBS60E-R5FAD1024 | Mechanical design: Through hollow shaft 12 mm (rear clamping) | Communication interface: 4.5 V ... 30 V, TTL, HTL, HTL | Connection type: Male connector, M23, 12-pin, radial | Pulses per revolution: 1,024 | Flange type / stator coupling: 1-sided stator coupling, slot, screw hole circle radius 31.5–48.5 mm
SLG10S-140FAKA1K01
Automation light grids | FlexChain | SLG10S-140FAKA1K01 | Device version: FlexChain Guest | Optical light exit: Flat | Beam separation: 10 mm | Operating range: 4 m | Detection height: 1,400 mm | Length of cable: 0.5 m
MLG30N-0570H10501
Automation light grids | MLG-2 | MLG30N-0570H10501 | Device version: ProNet – extended functionality including fieldbus | Option: None | Beam separation: 30 mm | Operating range: 5 m | Detection height: 570 mm | Length of cable: 0.22 m, 0.21 m | Response time: 3.6 ms | Software feature (default setting - see technical data/features): 01
DAXSAN-0600CA0K0900D00
Linear encoders | DAX | DAXSAN-0600CA0K0900D00 | Design: DAX Slider | Communication interface: - / Current | Current output: 4 mA ... 20 mA | Connection type: Male connector, M12, 5-pin | Measurement range: 0 mm ... 600 mm | Supply voltage: 24 V DC (± 20%) | Sequence of signals: Rising | Unusable range (zero zone/damping zone): 25 mm / 63 mm | Magnet type: C-magnet MAG-C-330-01
TBS-1BES21506CM
Temperature sensors | TBS | TBS-1BES21506CM | Temperature measuring range: –20 °C ... +120 °C | Process connection: Compression fitting G ½ A | Insertion length/diameter of probe: 150 mm / 6 mm | Seal: Copper | Output signal: 1 x PNP + 4 mA ... 20 mA | Connection type: M12 round connector x 1, 4-pin | Enclosure rating: IP65, IP67 | Communication interface: -
MLG02A-0295R13201
Automation light grids | MLG-2 | MLG02A-0295R13201 | Device version: Pro - Extended functionality | Inputs/outputs: 4 x Q (IO-Link) | Option: None | Beam separation: 2.5 mm | Operating range: 2 m | Detection height: 295 mm | Length of cable: 0.22 m, 0.27 m, 0.19 m | Response time: 10.5 ms | Software feature (default setting - see technical data/features): 01
AFS60S-SDKU262144
Safety encoders | AFS/AFM60S Pro | AFS60S-SDKU262144 | Safety integrity level: SIL 3 (IEC 61508, IEC 61800-5-3) | Performance level: PL e (EN ISO 13849-1) | Singleturn or multiturn version: Singleturn | Number of steps per revolution: 262,144 (18 bit) | Mechanical design: Solid shaft Servo flange 6 mm x 10 mm (with feather key) | Communication interface: SSI, SSI + Sin/Cos, non programmable | Connection type: Cable, 12-wire, axial, 10 m
DBS60E-RDFJ00500
Incremental encoders | DBS60 | DBS60E-RDFJ00500 | Mechanical design: Through hollow shaft 10 mm (rear clamping) | Communication interface: 4.5 V ... 30 V, TTL, HTL, HTL | Connection type: Cable, 8-wire, universal, 0.5 m | Pulses per revolution: 500 | Flange type / stator coupling: 2-sided stator coupling, slot, screw hole circle 63–83 mm
THTS-1PBD50506MZ
Temperature sensors | THTS | THTS-1PBD50506MZ | Temperature measuring range: –50 °C ... +250 °C | Process connection: Clamp (DIN 32676) DN 50 | Insertion length/diameter of probe: 50 mm / 6 mm | Seal: Without seal | Output signal: Pt100, 4-wire | Connection type: M12 round connector x 1, 4-pin | Enclosure rating: IP67, IP69 | Communication interface: -
DAXLON-0120B4480001900
Linear encoders | DAX | DAXLON-0120B4480001900 | Design: DAX Low Profile | Communication interface: CANopen | Baud rate: 1,000 kbit/s | Node ID: 7Fh (127) | Connection type: Male connector, M12, 5-pin | Resolution: 10 µm | Measurement range: 0 mm ... 120 mm | Supply voltage: 24 V DC (± 20%) | Unusable range (zero zone/damping zone): 55 mm / 63 mm | Magnet type: Large block magnet MAG-B-200-01
AHM36I-S4CL014x12
Absolute encoders | AHS/AHM36 | AHM36I-S4CL014x12 | Singleturn or multiturn version: Multiturn | Max. resolution: 14 bit x 12 bit (16,384 x 4,096) | Mechanical design: Solid shaft face mount flange 10 mm x 12 mm (With flat) | Communication interface: CANopen, programmable | Connection type: Cable, 5-wire, universal, 3 m | Programming interface: Over PLC-Engineering-Tool, over handheld programming tool | Encoder material / Enclosure rating: Stainless steel 1,4305 / IP67, IP69K
SPL-S280PTC2W04
Automation light grids | SLG | SPL-S280PTC2W04 | Optical light exit: Slim | Aluminum stabilizer: With stabilizer | Parameterization: None | Beam separation: 40 mm | Cross beam/parallel beam: Parallel beam active | Operating range: 1.5 m | Detection height: 280 mm | Response time: 38 ms
DFS60B-BEEK03600
Incremental encoders | DFS60 | DFS60B-BEEK03600 | Mechanical design: Blind hollow shaft 12 mm (Front clamp) | Communication interface: 10 V ... 32 V, HTL, Push pull | Connection type: Cable, 8-wire, universal, 1.5 m | Pulses per revolution: 3,600
DBS60E-THEQ01024
Incremental encoders | DBS60 | DBS60E-THEQ01024 | Mechanical design: Through hollow shaft 15 mm (Front clamp) | Communication interface: 10 V ... 27 V, HTL, Push pull | Connection type: Cable, 8-wire, with male connector, M23, 12-pin, universal, 0.5 m | Pulses per revolution: 1,024 | Flange type / stator coupling: 2-sided stator coupling, slot, screw hole circle 63–83 mm
LL3-TX01S01
Fiber-optic sensors | Fiber-optic cables | LL3-TX01S01 | Functional principle: Through-beam system | Fiber-optic head design: Threaded sleeve | Fiber length: 20,000 mm | Thread diameter (housing): M12 | Fiber material: Plastic | Jacket material: Plastic | Fiber head material: Stainless steel | Included with delivery: Mounting, 4 x M12 hexagon nut, FC fiber cutter (5304141), protective cladding for fiber head
AFS60S-BHSL262144
Safety encoders | AFS/AFM60S Pro | AFS60S-BHSL262144 | Safety integrity level: SIL 3 (IEC 61508, IEC 61800-5-3) | Performance level: PL e (EN ISO 13849-1) | Singleturn or multiturn version: Singleturn | Number of steps per revolution: 262,144 (18 bit) | Mechanical design: Blind hollow shaft 15 mm (with feather key groove) | Communication interface: SSI, SSI + Sin/Cos, programmable | Connection type: Cable, 12-wire, radial, 3 m
DFS60B-THAA05000
Incremental encoders | DFS60 | DFS60B-THAA05000 | Mechanical design: Through hollow shaft 15 mm (Front clamp) | Communication interface: 4.5 V ... 5.5 V, TTL, RS-422 | Connection type: Male connector, M23, 12-pin, radial | Pulses per revolution: 5,000
DFS60B-TAPC10000
Incremental encoders | DFS60 | DFS60B-TAPC10000 | Mechanical design: Through hollow shaft 6 mm (Front clamp) | Communication interface: 4.5 V ... 32 V, TTL, HTL, programmable | Connection type: Male connector, M12, 8-pin, radial | Pulses per revolution: 10,000