Търсене в каталога
41538 резултата за "SICK" · стр. 1486/2077

MAX30N-72PBDEA0355
Linear encoders | MAX | MAX30N-72PBDEA0355 | Type: Ø 30 mm 31f7 - IN Cylinder Mounting Ø31H8 | Pipe diameter / Damping zone / End cap: 30 mm / Flat | Supply voltage: 24 V DC (+8 V DC ... +32 V DC) | Communication interface: PWM | Connection type: Male connector, M12 type L (24x24 mm), 4-pin | Measuring range: 0 mm ... 355 mm

DAXLAN-0600BA0C0000W01
Linear encoders | DAX | DAXLAN-0600BA0C0000W01 | Design: DAX Low Profile | Communication interface: - / Current | Current output: 4 mA ... 20 mA | Connection type: Male connector, M12, 8-pin | Measurement range: 0 mm ... 600 mm | Supply voltage: 24 V DC (± 20%) | Sequence of signals: Signal 1: rising, signal 2: falling | Unusable range (zero zone/damping zone): 55 mm / 63 mm | Magnet type: Small block magnet MAG-B-180-01

DBS60E-BCAJC1024
Incremental encoders | DBS60 | DBS60E-BCAJC1024 | Mechanical design: Blind hollow shaft 3/8″ (Front clamp) | Communication interface: 4.5 V ... 5.5 V, TTL, RS-422 | Connection type: Cable, 8-wire, universal, 0.5 m | Pulses per revolution: 1,024 | Flange type / stator coupling: Axial and radial register pin mounting, for 4 mm register pin

DFS60E-BHCA00200
Incremental encoders | DFS60 | DFS60E-BHCA00200 | Mechanical design: Blind hollow shaft 15 mm (Front clamp) | Communication interface: 10 V ... 32 V, TTL, RS-422 | Connection type: Male connector, M23, 12-pin, radial | Pulses per revolution: 200

MLG02A-0895B13201
Automation light grids | MLG-2 | MLG02A-0895B13201 | Device version: Pro - Extended functionality | Inputs/outputs: 2 x analog + 2 x Q (IO-Link) | Option: None | Beam separation: 2.5 mm | Operating range: 2 m | Detection height: 895 mm | Length of cable: 0.22 m, 0.27 m, 0.19 m | Response time: 29 ms | Software feature (default setting - see technical data/features): 01

GL6-P0111S112
Photoelectric sensors | G6 | GL6-P0111S112 | Sensing range max.: 0.03 m ... 6 m | Functional principle: Photoelectric retro-reflective sensor | Functional principle detail: With minimum distance to reflector (dual lens system) | Switching output: PNP | Switching mode: Light/dark switching | Connection type: Cable with connector M8, 3-pin | Light source: PinPoint LED | Type of light: Visible red light | Housing material: ABS/PC | Adjustment: None | Special features: Dark switching (pre-setting) |

PBT-RP300SN1SS0ALA0Z
Pressure sensors | PBT | PBT-RP300SN1SS0ALA0Z | Pressure type: Gauge pressure | Pressure unit: psi | Measuring range: 0 psi ... 300 psi | Accuracy: ≤ ± 1 %, of the span (including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement as per IEC 61298-2)) | Process connection: ¼'' NPT | Pressure port: Standard | Process temperature: 0 °C ... +80 °C | Seal: Without seal | Communication interface: - | Output signal: 4 mA ... 20 mA, 2-wire | Connection type:

DFS60A-THAC32768
Incremental encoders | DFS60 | DFS60A-THAC32768 | Mechanical design: Through hollow shaft 15 mm (Front clamp) | Communication interface: 4.5 V ... 5.5 V, TTL, RS-422 | Connection type: Male connector, M12, 8-pin, radial | Pulses per revolution: 32,768

DBS60E-TCAAC1024
Incremental encoders | DBS60 | DBS60E-TCAAC1024 | Mechanical design: Through hollow shaft 3/8″ (Front clamp) | Communication interface: 4.5 V ... 5.5 V, TTL, RS-422 | Connection type: Male connector, M23, 12-pin, radial | Pulses per revolution: 1,024 | Flange type / stator coupling: Axial and radial register pin mounting, for 4 mm register pin

PBT-RM1X0SGESS0AMA0Z
Pressure sensors | PBT | PBT-RM1X0SGESS0AMA0Z | Pressure type: Gauge pressure | Pressure unit: MPa | Measuring range: 0 MPa ... 1 MPa | Accuracy: ≤ ± 1 %, of the span (including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement as per IEC 61298-2)) | Process connection: G ½ B (EN 837) | Pressure port: Standard | Process temperature: 0 °C ... +80 °C | Seal: Without seal | Communication interface: - | Output signal: 4 mA ... 20 mA, 2-wire | Connection

RSB1-1200H120050FP4BZZZP0A
Photoelectric sensors | Roller Sensor Bar | RSB1-1200H120050FP4BZZZP0A | Sensing range min. / max.: 2 mm / 300 mm | Functional principle: Photoelectric proximity sensor | Functional principle detail: Energetic | Length of Sensor Bar: 1,200 mm | Number of beams: 8 | Beam separation: 120 mm | Switching output: PNP | Connection type: Cable with connector M12, 4-pin, with knurled nut | Length of cable: 150 mm | Light source: LED | Type of light: Infrared light | Housing material: Aluminum (anodised)

DBS60E-RJCAC1024
Incremental encoders | DBS60 | DBS60E-RJCAC1024 | Mechanical design: Through hollow shaft 5/8″ (rear clamping) | Communication interface: 10 V ... 30 V, TTL, RS-422 | Connection type: Male connector, M23, 12-pin, radial | Pulses per revolution: 1,024 | Flange type / stator coupling: Axial and radial register pin mounting, for 4 mm register pin

WTB4S-3P2205VS01
Photoelectric sensors | W4 | WTB4S-3P2205VS01 | Sensing range max.: 4 mm ... 280 mm | Functional principle: Photoelectric proximity sensor | Functional principle detail: Background suppression | Switching output: PNP | Switching mode: Light switching | Connection type: Male connector M8, 4-pin | Light source: PinPoint LED | Type of light: Visible red light | Housing material: Stainless steel V4A (1.4404, 316L) | Adjustment: Wire/pin | Special features: Light spot diameter of 2.5 mm in 150 mm dis

DFS60B-BHAC10000
Incremental encoders | DFS60 | DFS60B-BHAC10000 | Mechanical design: Blind hollow shaft 15 mm (Front clamp) | Communication interface: 4.5 V ... 5.5 V, TTL, RS-422 | Connection type: Male connector, M12, 8-pin, radial | Pulses per revolution: 10,000

AHM36A-S4PC014x12
Absolute encoders | AHS/AHM36 | AHM36A-S4PC014x12 | Singleturn or multiturn version: Multiturn | Max. resolution: 14 bit x 12 bit (16,384 x 4,096) | Mechanical design: Solid shaft face mount flange 10 mm x 12 mm (With flat) | Communication interface: SSI, programmable | Connection type: Male connector, M12, 8-pin, universal | Programming interface: Over handheld programming tool, over SOPAS

DFS60A-S4CA36000
Incremental encoders | DFS60 | DFS60A-S4CA36000 | Mechanical design: Solid shaft face mount flange 10 mm x 19 mm (With flat) | Communication interface: 10 V ... 32 V, TTL, RS-422 | Connection type: Male connector, M23, 12-pin, radial | Pulses per revolution: 36,000

LFP1200-A5CMC
Level sensors | LFP Cubic | LFP1200-A5CMC | Communication interface: IO-Link | Process connection: G ¾ A | Probe length: 1,200 mm | Probe type: Rod probe | Remote amplifier: Yes, length of cable 2 m | Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V | Connection type: M12 round connector x 1, 8-pin | Process temperature: –20 °C ... +100 °C | Process pressure: –1 bar ... 10 bar | Wetted parts: Stainless steel 1.4404 / 316L, PTFE, FKM | Housing material: PBT | Enclosure rating:

AFM60S-TCSK262144
Safety encoders | AFS/AFM60S Pro | AFM60S-TCSK262144 | Safety integrity level: SIL 3 (IEC 61508, IEC 61800-5-3) | Performance level: PL e (EN ISO 13849-1) | Singleturn or multiturn version: Multiturn | Max. resolution: 18 bit x 12 bit (262,144 x 4,096) | Mechanical design: Through hollow shaft 3/8″ (with feather key groove) | Communication interface: SSI, SSI + Sin/Cos, programmable | Connection type: Cable, 12-wire, radial, 1.5 m

DBS60E-T5CJC1024
Incremental encoders | DBS60 | DBS60E-T5CJC1024 | Mechanical design: Through hollow shaft 12 mm (Front clamp) | Communication interface: 10 V ... 30 V, TTL, RS-422 | Connection type: Cable, 8-wire, universal, 0.5 m | Pulses per revolution: 1,024 | Flange type / stator coupling: Axial and radial register pin mounting, for 4 mm register pin

DAXTVN-0500RA130100400
Linear encoders | DAX | DAXTVN-0500RA130100400 | Design: DAX Threaded | Communication interface: - / Voltage | Voltage output: 0 V ... 10 V | Connection type: Male connector, M12, 5-pin | Measurement range: 0 mm ... 500 mm | Supply voltage: 24 V DC (± 20%) | Unusable range (zero zone/damping zone): 50 mm / 63 mm | Magnet type: Ring magnet MAG-O-S174-01 | Thread offset: Without thread offset | Thread shape: M18 x 1.5