Търсене в каталога
41538 резултата за "SICK" · стр. 1022/2077
DBS60E-BFFP00100
Incremental encoders | DBS60 | DBS60E-BFFP00100 | Mechanical design: Blind hollow shaft 1/2″ (Front clamp) | Communication interface: 4.5 V ... 30 V, TTL, HTL, HTL | Connection type: Cable, 8-wire, with male connector, M12, 8-pin, universal, 0.5 m | Pulses per revolution: 100 | Flange type / stator coupling: 2-sided stator coupling, slot, screw hole circle 63–83 mm
SFM60S-HRKB0K02
Safe motor feedback systems | SFS/SFM60-S | SFM60S-HRKB0K02 | Communication interface: HIPERFACE® | Model: Absolute Multiturn | Type: Stand-alone | Sine/cosine periods per revolution: 1,024 | Safety system: yes | Mechanical design: Blind hollow shaft | Connection type: Cable, 8-wire, universal, 1.5 m | Technology: Optical | Operating temperature range: –30 °C ... +85 °C | Items supplied: M3 mounting screws for stator coupling not included with delivery.
MAX48A-12C7FFA0500
Linear encoders | MAX | MAX48A-12C7FFA0500 | Type: Ø 48 mm 48f7 - IN Cylinder Mounting Ø48H8 | Pipe diameter / Damping zone / End cap: 30 mm / Flat | Supply voltage: 24 V DC (+8 V DC ... +32 V DC) | Communication interface: CANopen | Connection type: Male connector, M12 type L (24x24 mm), 5-pin | Measuring range: 0 mm ... 500 mm
AFM60S-S1KS262144
Safety encoders | AFS/AFM60S Pro | AFM60S-S1KS262144 | Safety integrity level: SIL 3 (IEC 61508, IEC 61800-5-3) | Performance level: PL e (EN ISO 13849-1) | Singleturn or multiturn version: Multiturn | Max. resolution: 18 bit x 12 bit (262,144 x 4,096) | Mechanical design: Solid shaft Servo flange 6 mm x 10 mm (With flat) | Communication interface: SSI, SSI + Sin/Cos, non programmable | Connection type: Cable, 12-wire, axial, 3 m
PBSH-RB010SD5S0D5A0Z
Pressure sensors | PBS Hygienic | PBSH-RB010SD5S0D5A0Z | Pressure type: Gauge pressure | Pressure unit: bar | Measuring range: 0 bar ... 10 bar | Accuracy: ≤ ± 1 %, of the span (including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement as per IEC 61298-2)) | Process connection: Clamp (DIN 32676) DN 50 | Process temperature: –20 °C ... +100 °C | Seal: Without seal | Communication interface: - | Output signal: 2 x PNP + 4 mA ... 20 mA | Connection ty
DBS60E-R6EJD1024
Incremental encoders | DBS60 | DBS60E-R6EJD1024 | Mechanical design: Through hollow shaft 1/2″ (rear clamping) | Communication interface: 10 V ... 27 V, HTL, Push pull | Connection type: Cable, 8-wire, universal, 0.5 m | Pulses per revolution: 1,024 | Flange type / stator coupling: 1-sided stator coupling, slot, screw hole circle radius 31.5–48.5 mm
DBS60E-TCFPC1024
Incremental encoders | DBS60 | DBS60E-TCFPC1024 | Mechanical design: Through hollow shaft 3/8″ (Front clamp) | Communication interface: 4.5 V ... 30 V, TTL, HTL, HTL | Connection type: Cable, 8-wire, with male connector, M12, 8-pin, universal, 0.5 m | Pulses per revolution: 1,024 | Flange type / stator coupling: Axial and radial register pin mounting, for 4 mm register pin
DBS60E-BHAK03600
Incremental encoders | DBS60 | DBS60E-BHAK03600 | Mechanical design: Blind hollow shaft 15 mm (Front clamp) | Communication interface: 4.5 V ... 5.5 V, TTL, RS-422 | Connection type: Cable, 8-wire, universal, 1.5 m | Pulses per revolution: 3,600 | Flange type / stator coupling: 2-sided stator coupling, slot, screw hole circle 63–83 mm
IMB18-08BNOVU2S
Inductive proximity sensors | IMB | IMB18-08BNOVU2S | Housing: Standard design | Special applications: Zones with coolants and lubricants, Mobile machines, Difficult application conditions | Sensing range Sn: 8 mm | Installation type: Quasi-flush | Electrical wiring: DC 3-wire | Switching output: NPN | Output function: NC | Connection type: Cable, 3-wire, 2 m | Special features: Resistant against coolant lubricants, Visual adjustment indicator, Temperature resistance
SAS4-S028N3PS1W00
Automation light grids | SLG | SAS4-S028N3PS1W00 | Optical light exit: Slim | Aluminum stabilizer: Without stabilizer | Parameterization: None | Beam separation: 40 mm | Cross beam/parallel beam: Parallel beam active | Operating range: 3 m | Detection height: 280 mm | Response time: 19 ms
DAXLON-1000B30D0001700
Linear encoders | DAX | DAXLON-1000B30D0001700 | Design: DAX Low Profile | Communication interface: CANopen | Baud rate: 125 kbit/s | Node ID: 7Fh (127) | Connection type: Male connector, M12, 5-pin | Resolution: 20 µm | Measurement range: 0 mm ... 1,000 mm | Supply voltage: 24 V DC (± 20%) | Unusable range (zero zone/damping zone): 55 mm / 63 mm | Magnet type: Small block magnet MAG-B-180-01
DBS60E-S4FK00500
Incremental encoders | DBS60 | DBS60E-S4FK00500 | Mechanical design: Solid shaft face mount flange 10 mm x 19 mm (With flat) | Communication interface: 4.5 V ... 30 V, TTL, HTL, HTL | Connection type: Cable, 8-wire, universal, 1.5 m | Pulses per revolution: 500 | Flange type / stator coupling: Flange with 3 x M3 and 3 x M4
WTB4FP-22161120A00
Photoelectric sensors | W4 | WTB4FP-22161120A00 | Sensing range min. / max.: 4 mm / 220 mm | Functional principle: Photoelectric proximity sensor | Functional principle detail: Background suppression | Switching output: Push-pull: PNP/NPN | Switching mode: Light/dark switching | Connection type: Male connector M8, 4-pin | Light source: PinPoint LED | Type of light: Visible red light | Housing material: VISTAL® | Adjustment: Teach-in button, Potentiometer, IO-Link, Teach-Turn adjustment | Communi
WTB4SL-3P4262H
Photoelectric sensors | W4 | WTB4SL-3P4262H | Sensing range max.: 25 mm ... 300 mm | Functional principle: Photoelectric proximity sensor | Functional principle detail: Background suppression | Switching output: PNP | Switching mode: Light/dark switching | Connection type: Cable, 4-wire, 5 m | Light source: Laser | Type of light: Visible red light | Laser class: 1 | Housing material: Stainless steel V4A (1.4404, 316L) | Adjustment: Teach-in button | Housing: Rectangular
ARS60-FAB04000
Absolute encoders | ARS60 | ARS60-FAB04000 | Singleturn or multiturn version: Singleturn | Number of steps per revolution: 4,000 | Mechanical design: Blind hollow shaft 15 mm (Front clamp) | Communication interface: Parallel data world | Connection type: Male connector, M23, 21-pin, axial
DFS60B-TDPC10000
Incremental encoders | DFS60 | DFS60B-TDPC10000 | Mechanical design: Through hollow shaft 10 mm (Front clamp) | Communication interface: 4.5 V ... 32 V, TTL, HTL, programmable | Connection type: Male connector, M12, 8-pin, radial | Pulses per revolution: 10,000
MLG50S-0700A10503
Automation light grids | MLG-2 | MLG50S-0700A10503 | Device version: Prime - Standard functionality | Inputs/outputs: 2 x analog + 1 x Q (IO-Link) | Option: None | Beam separation: 50 mm | Operating range: 5 m | Detection height: 700 mm | Length of cable: 0.22 m, 0.22 m | Response time: 6 ms | Software feature (default setting - see technical data/features): 03
AFM60S-SGKA262144
Safety encoders | AFS/AFM60S Pro | AFM60S-SGKA262144 | Safety integrity level: SIL 3 (IEC 61508, IEC 61800-5-3) | Performance level: PL e (EN ISO 13849-1) | Singleturn or multiturn version: Multiturn | Max. resolution: 18 bit x 12 bit (262,144 x 4,096) | Mechanical design: Solid shaft Servo flange 6 mm x 10 mm (with feather key) | Communication interface: SSI, SSI + Sin/Cos, non programmable | Connection type: Male connector, M23, 12-pin, radial
MLG10N-0740H10501
Automation light grids | MLG-2 | MLG10N-0740H10501 | Device version: ProNet – extended functionality including fieldbus | Option: None | Beam separation: 10 mm | Operating range: 5 m | Detection height: 740 mm | Length of cable: 0.22 m, 0.21 m | Response time: 7.1 ms | Software feature (default setting - see technical data/features): 01
DFS60B-TDEK00512
Incremental encoders | DFS60 | DFS60B-TDEK00512 | Mechanical design: Through hollow shaft 10 mm (Front clamp) | Communication interface: 10 V ... 32 V, HTL, Push pull | Connection type: Cable, 8-wire, universal, 1.5 m | Pulses per revolution: 512